If there are fibers or other difficult dispersible materials or viscous materials and viscous false particles in the mixed material how to mix? These have always been a problem for the brake pad material industry, and for such material characteristics professional mixer manufacturers can be solved, then the mixing by a single hybrid can not be achieved, simple hybrid can not achieve uniform mixing, at this time the mixing process needs high-speed dispersion, The mixing equipment needs to design and manufacture high-speed rotating blade assembly and internal rotating shaft.

People have carried out a lot of practice on improving the performance of friction materials, improving processing methods and extending service life of brake pads. As a result, it is necessary to achieve the goal through reasonable formula design and high-end mixing technology. After deciding on the materials and proportions to be used in the formulation, the mixing equipment and its mixing process need to be selected.

The advantages of high-speed knife mixing equipment in the mixture containing fiber powder, viscous powder and false particles are more obvious, especially the brake pad material industry is more widely used. In the application of brake pads in the industry, its main material composition usually contains about 30% to 50% of iron metal, such as steel fiber, reduced iron powder, foam iron powder, etc., the mixing process is difficult to achieve uniformity using ordinary three-dimensional mixer, because ordinary mixing equipment does not have high-speed shear force, The fiber powder of the brake pad raw material powder can not achieve multiple shear mixing, so if you want to improve the mixing quality, you need high-speed flying knife mixing equipment to carry out multiple dynamic mixing and shear mixing, so as to improve product quality. This simplifies the task of the operator of the mixing equipment and reduces the incidence of potential errors.

In the brake pad production process generally need to mix a variety of raw materials, the existing mixing equipment only rely on gravity throwing mixing, the use of cumbersome operation, mixing effect is not good, so it is urgent to develop a good mixing effect, low production cost, simple operation, easy to use brake pad production mixing equipment. This is the use of Zeke machinery professional high-speed knife mixing equipment.

Fiber powder mixing equipment is the brake pad mixing problem! The high-speed flying knife mixing equipment uses high speed mixing, which is also a 360 degree mixing with a low gap, to achieve the uniform mixing of various materials such as steel fiber, reduced iron powder, foam iron powder, etc., so that the mixing bucket has no dead Angle, and has a high degree of kneading mixing effect, so that the materials rapidly penetrate and mix evenly in a short time. The high speed and high strength shear action of the internal stirring blade assembly has a high speed shear mixing of fiber and viscous particles, which achieves high efficiency. The unique mixing and dispersing mixing structure design greatly improves the production capacity of brake pad production equipment and can carry out efficient production.

Previous：Fiber material quality improvement is inseparable from this mixer

Next：The main reason to determine the performance of three-dimensional mixer