Dual power high speed mixer is suitable for solid (powder) -solid (powder) mixing and solid (powder) -liquid mixing, a direct driving device to drive the equipment movement, torque control coupling can make the machine in the case of full load pneumatic, reduce the risk caused by excessive load. According to user requirements, various customized production can be achieved, such as designed with vacuum high-speed mixer, cooling high-speed mixer or heating jacket high-speed mixer.

Zeke dual power high-speed mixer, the use of advanced mixing principle, to achieve the industry of a variety of materials efficient mixing, multiple power systems overlap back and forth mixing, mixing speed is faster, high symmetry. The protection of the mixer in use is also very important for the length of its life, and the following issues need to be paid attention to in use.

(1) The high-speed mixer should check the machine before it is used in the factory, and the equipment should be installed on site and adjusted parallel to the flexible rotation of the barrel body. The mixer barrel is a rotating part, and the staff must not be close to it during operation to avoid bruises and scratches.

(2) After plugging in the power supply, it is strictly prohibited to touch the material bucket and other rotating parts when the equipment starts running.

(3) Regularly apply lubricating oil to the parts of the high-speed mixer, and when protecting maintenance, cleaning and lubrication, the machine must have stopped running, the power must be cut off, and the emergency stop button must be pressed.

(4) The high-speed mixer is a metal shell, requiring that the equipment must be grounded before use, and the grounding end is at the ground mark inside the equipment to prevent electric shock.

Pay attention to the use of coupled with the design and use advantages of dual-power high-speed mixer, the material cross-type overlap mixing under multiple effects, which promotes the material to be more sufficient and more effective to get thoroughly mixed, and further improve the mixing symmetry, and more fully prove that the structure is a must to change the symmetry.

Previous：Which mixer is better in the powder metallurgy industry?

Next：Seasoning three-dimensional mixing machine food industry representative machinery